Brand : Progrip
Model : 6FT X 1″ STANDARD CAMBUCKLE WITH S HOOKS
Product ID : 280010
Break strength : 900 lbs
Working load limit : 300 lbs
6 ft. x 1 in
6FT X 1″ STANDARD CAMBUCKLE WITH S HOOKS
SKU:
BL-PR-6FRC6156
7.250 KWD
* Blue polyester webbing
* Coated S-Hooks
* 900 pounds break strength with 300 pounds working load limit
-
Express Delivery 6-48 Hours
-
Easy 14 Days return
Payment Methods:
Description
Specification
Overview
| Brand |
|---|
Customer Reviews
Show only reviews in English (0)
Be the first to review “6FT X 1″ STANDARD CAMBUCKLE WITH S HOOKS” Cancel reply
Related Products
Abro Aluminium Foil Tape
2.500 KWD
Gorilla Wood Glue 236 ml
1.500 KWD
Gorilla Wood Glue is the adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with the holding power Gorilla is known for. The glue is incredibly water resistant and dries a natural color that offers an invisible bond line for your projects.
• Clamp Time: 20-30 Minutes // Open Time: 5-10 Minutes
• Dry Time: 80% in 1-2 Hours // Dry Color: Natural Wood Color
• Full Cure: 24 Hours
Mannesmann Tool Kit (56 Pieces)
10.500 KWD
56 pieces tool assortment :
• 4 x workshop screwdriver: Chrome Vanadium Steel,
• Flat: 6 x 100, 8 x 150
• Cross: # 2 x 100 # 3 x 150 mm
• 2 x fine mechanical screwdriver
• 1x Screw ratchet handle
• 1 x Flexible Extension, 190 mm
• 1 x Engineer's Hammer 200 g/GS tested
• 1 x Adjustable Wrench 6 "
• 1 x Combination Pliers, 150 mm, with heavy handle covers
• 31 x Bits, 25 mm long,
• Chrome Vanadium Steel
• 1 x magnetic bit holder
• 1 x Adapter for sockets
• '12 x Sockets 1/4 inch drive (Metric/Inch measurements)
• Weight 2.25 kg
Masada MH-7 7 Ton Hydraulic Bottle Jack
21.000 KWD
MORAKNIV BELLY OPENER
10.750 KWD
MORAKNIV BUTCHER KIT BLACK
25.000 KWD
MORAKNIV FROSTS SHARPENING STEEL P 203
12.750 KWD
This elliptic sharpening steel has a micro fine surface and is available in three different lengths. It helps you to align the knife edge back into a central position. Pull the knife’s edge a few times lightly against the sharpening steel with a 15-20 degree angle. Switch between the cutting edge both sides. The knife should be placed against the sharpening steel at the same angle corresponding to the cutting edge top angle. This angle between the sharpening steel and knife edge must be maintained while drawing the knife from the back edge to the knife point. The last “draw“ should be very light.
ROBENS Multi-Purpose Hammer
10.500 KWD














Reviews
There are no reviews yet.